Part Finder

S.105349

Activator 7455 - 150ml

LOCTITE® 7455 Activator (150ml).General purpose.Increases cure speed on passive & inactive surfaces.Provides excellent aesthetic appearance of bond line.Suitable for stress cracking sensitive plastics.Fast fixing between close fitting parts.

S.105347

Activator 7471 - 150ml

LOCTITE® 7471 Activator (150ml).Activator for threadlocking pipe, threadsealing gaskets, retaining & Anaerobic acrylics.Increases cure speed on passive & inactive surfaces.Recommended for use on passive metals, plated or passive surfaces.

S.51875

Activator 7649 - 150ml

LOCTITE® 7649 Activator (150ml).Suitable for promoting the speed of cure.

S.105365

Adhesive (Black) 480 - 20gr

LOCTITE® 480 Instant Adhesive (20g).Cures very quickly when confined between surfaces. Clean & easy to apply.Joins a variety of dissimilar materials.Free of solvents.Fixture time: 20-50secs.Viscosity: 150mPa's.Service Range: -40 - +100°C

S.105368

Adhesive (Clear) 435 - 20gr

LOCTITE® 435 Toughened Clear Instant Adhesive (20g).High resistance to impact & shock loads.High peel strength.Joins a variety of dissimilar materials.Free of solvents.Fixture time: 10-20 secs.Viscosity: 200mPa-s.Service Range: -40 - +100°C

S.105357

Adhesive MS 939 Black - 290ml

LOCTITE® MS 939 Teroson adhesive (290ml).General purpose versatile elastic bonding adhesive.High strength.Good elasticity.Self-levelling. Meets damp heat test for solar industry.Skin formation time: 10mins.Service Range: -40°C - +100°C

S.105355

Adhesive MS 939 White - 290ml

LOCTITE® MS 939 Teroson adhesive, white (290ml).General purpose versatile elastic bonding adhesive.High strength.Good elasticity.Self-levelling.Meets damp heat test for solar industry.Skin formation time: 10mins.Service Range: -40°C - +100°C.

S.105363

Aecetoxy Silicone Sealant (Black) 5368 - 310ml

LOCTITE® 5368 Acetoxy Black Silicone (310ml).General purpose.1K acetoxy silicone.Skin formation time: 5 mins.Elongation at break: 500%.Hardness shore A: 20.Shear Strength (GBMS) Nmm²: 2.2.Service Temperature Range (Up to): 250°C.

S.105364

Aecetoxy Silicone Sealant (Red) 5399 - 310ml

LOCTITE® 5399 Acetoxy Red Silicone (310ml)High Temp Resistance.1K acetoxy silicone.For bonding and sealing glass, metal & ceramics.Skin formation time: 5 mins.Shear strength (GBMS) Nmm²: 3.3.Service Range (Up to): 300°C.

S.14955

Bearing Fit 641 - 10ml

LOCTITE® 641 Bearing Fit (10ml).Recommended for use on parts that need subsequent dismantling, e.g. bearings and bushes.Can be readily removed from shafts and housings by ordinary methods.

S.19206

Chisel Areosol 7200 - 400ml

LOCTITE® SF 7200 Chisel Areosol (400ml).Designed to remove cured chemical gaskets by softening the material on the flanges.Once applied, the product develops a foam-like layer on the gasket, preventing the agent from running off the desired location. It therefore keeps working for the required duration.Typical applications include removal of all types of chemical gaskets from metal flanges.Particularly suitable for aluminium or other soft metal flanges where scraping could lead to surface damage.

S.105369

Cleaner 7070 - 400ml

LOCTITE® 7070 Cleaner and Degreaser for Plastic Parts (400ml).Solvent-based general parts cleaner.Removes special heavy oils.For most plastic parts without risk of stress cracks.

S.14769

Fast Epoxy 3430 - 24ml

LOCTITE® 3430 Fast Epoxy (24ml).Bonds ceramics, wood, metal, glass and plastics.Can be painted. Suitable for bonding or filling gaps.

S.14960

Flange Sealant 510 - 50ml

LOCTITE® 510 Flange Sealant Superfast (50ml).To seal close fitting joint between metal faces and flanges.Particularly suited where maximum temperature and chemical resistance are required.

S.105340

Flexible Gasket (Red) 5205 - 300ml

Loctite® 5205 Flexible Gasket Fast Cure, Red (300ml).Nmedium Strength.Nhigh Resistance To Solvents.Nresists High Pressure When Fully Cures.Nservice Range: -50°C - +150°C.Ntensile Sheer Strength: 3 Nmm².Nmax Gap: 0.125mm

S.14963

Gasket Eliminator 515 - 50ml

LOCTITE® 515 Gasket Eliminator (50ml).Replacement for pre-cut gaskets.Fills gaps to .010 (0.25mm) and does not shrink.Continuous operating temperature range of -60°F to 300°F.Cures to a flexible seal 1-8 hours.

S.14761

Gasket Eliminator 518 - 50ml

LOCTITE® 518 Gasket Eliminator (50ml).For sealing rigid flange faces, e.g. water pump flanges, engine, differential and timing covers.Seals instantly against low pressures.Fills gaps up to 0.5 mm max.Temperature range -55°C to +150°C.

S.14767

Gasket Sealant 5922 - 60ml

LOCTITE® 5922 Flange Sealant (60ml).A non-hardening sealant used to seal all types of pre-cut gaskets.Resists temperatures up to 200°C.

S.14768

Gasket Sealant 5926 - 40 ml

LOCTITE® 5926 is a multi-purpose flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket.Ideal for use on flexible flanges, machined or cast surfaces, metal or plastic.This product resists ageing, weathering and thermal cycling without hardening, shrinking or cracking.Typical applications include valve covers, timing gear covers, differential covers, oil pans, transmission pans, water pumps, and thermostat housings.This product is typically used in applications with an operating temperature range of -54 °C to 204 °C.Multi-purpose flexible silicone sealant. Can be used on metal, plastic and painted partsResists vibration, thermal expansion and contractionOperating temperature range of -54 °C to +150 °C.

S.13244

Glazing Kit For Simple Replacement Of Windscreens.

Contains Cleaner for paint and glass, primer and sealant, applicator, cleaning cloth and full instructions.

S.14957

LOCTITE 603 10ml

LOCTITE® 603 Oil Tolerant Retainer (10ml).For retaining bearings bushes and key-ways.Use to bond all cylindrical close fitting parts up to 0.15mm gap especially where thorough degreasing is not possible.

S.50952

LOCTITE 7063 Cleaner 400ml

LOCTITE® SF 7063 is our general-purpose product for cleaning and degreasing any kind of surface or machinery component before proceeding with a repair or assembly job involving LOCTITE adhesives. It is a solvent-based cleaner and the product leaves no residue. LOCTITE SF 7063 removes most greases, oils, lubrication fluids and metal cuttings.

S.13239

LOCTITE 7235 Brake Clean 600ml

LOCTITE® SF 7235 is a solvent formulation aerosol spray designed to remove dirt, oil, grease, brake fluid, and brake dust deposits from brake callipers, drums, disks, cylinders, pads, linings, shoes and surrounding components. Its superior wetting action makes it suitable for brake and clutch systems still equipped with asbestos components. Not recommended for cleaning plastic or rubber parts.metals.

S.105367

LOCTITE 770 Polyolefin 300gr

Loctite Polyolefin Primer B770 - Colourless (300g). Improves best adhesion to substrates. Applied before the adhesive. For low energy, difficult to bond plasitcs. Solvent: Heptane

S.14773

LOCTITE 7850 - 3 liter

S.14772

LOCTITE 7850 Hand Cleaner 400ml

Fast Orange Hand Cleaner 7850 Environmentally friendly hand cleaner made from citrus oils. Contains pumice to help remove ground-in dirt, tar, grease and oil, as well as skin conditioners. Ideal for use anywhere as water is not required.

S.105350

LOCTITE 8008 Anti-Seize 454gr

Loctite Anti-Seize B8008 (454g). Copper based anti-sieze brush top can. Provides protection in harsh environments & operating conditions. Prevent fretting & galvanic corrosion. Solid lubricating agent: Copper & Graphite. Service Range: -30 - 980°C

S.22410

LOCTITE 8040 Freeze & Release 400ml

LOCTITE-8040 FREEZE & RELEASE

S.105351

LOCTITE 8151 Anti-Seize 400gr

Loctite Anti-Seize B8151 (400g). Aluminium based anti-seize. Provides protection in harsh environments & operating conditions. Protects threaded connections. Prevents seizing. Service Range: -30 - 900°C

S.19281

LOCTITE 8597 Sealant 310ml

Glazing Sealant 8597

S.14771

LOCTITE Metal Set 25ml

Metal Set For repairing or filling iron, steel, brass, bronze, aluminium, copper, wood and concrete. Sets in 15 minutes. Can be drilled, filed, tapped, machined or painted. Resists temperatures up to 120°C.

S.14764

LOCTITE Superglue 5gr

Superglue 3 Suitable for use with metal, rubber and plastics. Bonds in seconds.

S.14952

Multi Gasket Sealant 574 - 50ml

LOCTITE® 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flange connections. The nature of LOCTITE® 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.

S.14755

Nutlock 243 - 10ml

LOCTITE® 243 Threadlocker (10ml) A general purpose threadlocker of medium bond strength.This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

S.14757

Nutlock 243 - 50ml

LOCTITE® 243 Threadlocker (50ml).A general purpose threadlocker of medium bond strength.This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

S.105366

Polyolefin Primer 770 - 10gr

LOCTITE® 770 Polyolefin Primer, Colourless (10g).Improves best adhesion to substrates.Applied before the adhesive.For low energy, difficult to bond plastics.Solvent: Heptane.

S.105345

Retainer (Green) 603 - 250ml

LOCTITE® 603 Retainer, Green (250ml).High strength, oil tolerant.Ideal for retaining close fitting cylindrical parts where degreasing is not possible.Approved for use on bearings.Service Range: -55°C - + 150°C.Tensile sheer strength: >22.5

S.105344

Retainer (Green) 638 - 250ml

LOCTITE® 638 Retainer, Green (250ml).High strength, general purpose retainer.100% contact load.Best resistance to dynamic, axial & radial loads.Service Range: -55°C - + 150°C.Tensile sheer strength: >25.Max diametrical clearance: 0.25mm

S.14958

Retainer (Green) 638 - 50ml

LOCTITE® 638 Retainer, Green (50ml).High Strength Retainer increases torsional strength and enables slip-fitted parts to withstand higher cyclic loading's.To retain and seal heavy duty parts.Typical fixture time is 5 minutes.

S.105346

Retainer (Green) 648 - 250ml

LOCTITE® 648 Retainer, Green (250ml).High strength retainer.Ideal for retaining of parts with a clearance or interference fit, i.e. retaining bushes, bearings, seals, fans, and liners.Increased temperature resistance.WRC Approval (BS 6920): 0808532.

S.14762

Retainer 603 - 50ml

LOCTITE® 603 Retainer, Green (250ml).High strength, oil tolerant.Ideal for retaining close fitting cylindrical parts where degreasing is not possible.Approved for use on bearings.Service Range: -55°C - + 150°C.Tensile sheer strength: >22.5 Nmm².

S.50919

Retainer 648 - 50ml

LOCTITE® 638 Retainer (50ml).Maximum strength retaining compound for use where high dynamic force or cyclic loading is expected.Locks cylindrical assemblies up to 0.25mm / 0.01 diametral clearance.Fixtures in 5 minutes.

S.105354

Sealant MS 930 Black - 310ml

LOCTITE® MS 930 Teroson adhesive (310ml).General purpose soft elastic sealing.Paty, thixotropic.UV & weathering resistant sealant.Skin Formation Time: 25-40mins.Depth of cure after 24h: 4mm.Service Range: -50°C - +80°C

S.105353

Sealant MS 930 White - 310ml

Loctite TerosonGeneral puropse soft elastic sealing.Paty, thixotropic.UV & weathering resistant sealant.Skin FormationTime: 25-40mins.Depth of cure after 24h: 4mm.Service Range: -50°C - +80°C

S.14961

Silicone Sealant (Black) 5940 - 100ml

LOCTITE® 5940 Black Silicone Sealant (100ml).High resistance to ageing, shrinkage, cracking and discolouring.Solvent-freeCures on exposure to moisture in the air to form a tough, flexible, waterproof, oil-resistant silicone rubber bond.Typically used in applications with an operating range of -50°C to +200°C and can intermittently reach temperatures up to +220°C

NORDAMERIKA

AUSTRALIEN

AFRIKA

ANDRE LANDE

Filter Anvendt

Mærke/Model

Søgning med søgeord

Kategori

Filtrer Søgning