The self-loosening of bolted joints is one of the most commonly occuring failure modes in the operation of machines and systems. HEICO-LOCK® wedge lock washers prevent loosening of the bolted joint by providing a safe and reliable bolt securing system - even for extremes of vibration or dynamic loads. Certified system for securing bolts, working at low and high preload levels Particularly suitable for dynamic loads – including when using lubricants Can be re-used Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair) Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nutsCertified system for securing bolts, working at low and high preload levels Particularly suitable for dynamic loads – including when using lubricants Can be re-used Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair) Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nutsSpecifikationer
Passer til mærke/modelOEM varenumre
Relaterede Varer
Specifikationer
Passer Til Mærke/Model
OEM varenumre
Katalogsider
Specifikationer
Specifikationer
The self-loosening of bolted joints is one of the most commonly occuring failure modes in the operation of machines and systems. HEICO-LOCK® wedge lock washers prevent loosening of the bolted joint by providing a safe and reliable bolt securing system - even for extremes of vibration or dynamic loads. Certified system for securing bolts, working at low and high preload levels Particularly suitable for dynamic loads – including when using lubricants Can be re-used Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair) Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nutsCertified system for securing bolts, working at low and high preload levels Particularly suitable for dynamic loads – including when using lubricants Can be re-used Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair) Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nuts
HEICO
Antal i æske:
200 pcs.
DIN or Standard No.
DIN 25201
erp_barcode_128
S.150472
erp_barcode_ean13
5045161504726
Farve
Sølv
Gevindstørrelse
M8
Indvendig Ø (millimeter)
8.6
Materiale
1.1191/C45E Stål
Mærke
HEICO
Overflade
through-hardened, zinc flake coated
Skive slags
Locking washer - Standard
Tariff Code
7318220098
Tykkelse (milimeter)
2.6
Udvendig Ø (millimeter)
13.5
Passer Til Mærke/Model
Passer Til Mærke/Model
Dette produkt er ikke forbundet med nogen bestemt mærke eller model
OEM varenumre
OEM varenumre
Dette produkt er ikke forbundet med et bestemt OEM-delenummer
Katalogsider
Katalogsider
Dette produkt vises ikke i nogen Sparex-trykte kataloger
